How to Reset Whirlpool Dishwasher
When it comes to cleaning all of your dirty plates, nothing beats the Whirlpool dishwasher. But every now and again, there will be times when the appliance might malfunction. So, you’ll need to give it a good old fashion reset, but how do we do that? For this tutorial, we’re going to learn how to reset your Whirlpool dishwasher.
Can you soft reset the Whirlpool Dishwasher?
Yes, believe it or not. Though not explicitly stated, you can soft reset your dishwasher by simply holding the Start/Reset button on the main interface for a few seconds. It’s as simple as that. However, this method requires that the dishwasher be fully functional. Otherwise, you’ll need to hard reset the dishwasher, which is just as easy, but with a few extra steps and cautions.
How to reset whirlpool dishwasher | Two Methods
So, how do you reset Whirlpool dishwashers? Well, two ways actually. One involves unplugging the dishwasher and the other involve activating diagnostic mode. Which mmethod you want to use depends on whether or not your Whirlpool dishwasher lets you unplug it.
Method- 1 unplugging the dishwasher
So, say that a soft reset isn’t enough, and you’ll need to hard reset your whirlpool dishwasher. How do you do that? Thankfully, this section is dedicated to help you learn how to reset whirlpool dishwashers, the hard way. Despite the “hard” in hard reset, the process is surprisingly simple, you just need to be more cautious.
Step 1: Unplug the dishwasher
First, turn off the power outlet and unplug the dishwasher. Make sure that your hands are dry and there is no water next to the power outlet or the plug. On that note, keep a towel handy, just in case. See, it’s that simple.
Step 2: Wait for at least 5 minutes
Now, just wait for at least 1-5 minutes, and just like that, you’ve already hard reset your Samsung dishwasher. But keep that in mind that the effectiveness of the reset depends on how long the dishwasher was unplugged for.
Step 3: Turn the power back on
After waiting, with your dry hands, plug the dishwasher back in and turn the power back on. Also make sure the plug and the environment around the power outlet is dry. If the plug is wet, wire it off with a dry cloth and wait a while for extra measure. Once you’re certain that it’s safe and your hands are dry, you can turn on the power outlet.
Method- 2 Activating the Diagnostic mode
Whirlpool dishwashers have something that can help you reset your dishwasher if all else fails, Diagnostic mode. This will allow you to soft reset the dishwasher, without the need to unplug the your Samsung dishwasher. So, how do you even access this mode in the first place?
- Press the Heated Dry button, then press the Normal button, before pressing both of those buttons simultaneously in quick succession. If it doesn’t work, try it again, but with the door open this time.
- If that doesn’t work, press three buttons in a row twice.
- If you did everything right and it worked, your dishwasher should enter Diagnostic mode, after which will cause the Whirlpool dishwasher to reset.
Most newer models have another method, requiring you to press any three buttons consecutively twice. You can learn more a bout this mode on your dishwasher’s respective instruction manual.
FAQ
What is the most common problem with a Whirlpool dishwasher?
Of all the issues that a Whirlpool dishwasher faces, the dishwasher not draining properly is the most common and egregious one. This is due to improper cleaning and food debris getting stuck at there. If you want to learn how to prevent this from happening, you need to clean the Whirlpool dishwasher frequently.
What are the error codes for a Whirlpool dishwasher?
When something goes wrong, the dishwasher will occasionally flash a message on the control panel. Which message it shows denotes what’s going on.
- Error Code F1 – Temperature Sensor issues
- Error Code F2 – Water Leak
- Error Code F3 – Heating System malfunction
- Error Code F4 – Drainage System problems
- Error Code F5 – Rotor blocked
- Error Code F6 – The dishwasher is not filling
- Error Code F7 – Flow meter blockage
- Error Code F8 – Water level overflow
- Error Code F9 – Continuous water inlet or control panel malfunction
- Error Code F0/F10 – Sensor Failure
- Error Code FA – Optical water indicator issues
- Error Code FB – Motorized diverter valve issues
- Error Code FC – Water hardness sensor alarm
Conclusion
The Whirlpool dishwasher is one of the best dishwashers you can find, but that doesn’t mean it’s invulnerable technical issues. Sometimes a good old fashioned reset might be the simplest solution to the problem. With this tutorial on how to reset whirlpool dishwasher, we hope you’ve learned a little more about everyone’s favorite dishwashing appliance.
